Taking The Veil Off Facades: The Different Choices For You

There is a lot that you need to do when making an architectural design – right from the die drawings to complete the calculations for the façade system accurately. Yet, what are the different types of façade choices out there? Here is a look.

A Little Slice Of History

Facades have been around in one form or another since the seventeenth century. Back in that age they were made of huge detailed rocks and logs of wood. The huge structure, labor and expense made the use of facades confined to buildings like churches and other huge pieces of architecture. Facades have come a long way these past few centuries, become more modern and innovative.

The Story Of Development

Facades have been developed to a level where it is used for several other purposes than just being decorative or as a representative of your wealth. They have been grown into being weather proofing and control systems. These have become more popular today as they are highly energy efficient. The materials used include aluminum, zinc, copper, glass or titanium.

There are three major types of façade systems implemented commonly today

  1. Q-Ventilated Façade Systems

This system is basically a derivative of the Terracotta rainscreen installation system. It uses a double wall design that enables the outer layer to keep away the water and the inner layer maintains the thermal insulation.

It’s important because it helps in maintaining the ventilation and keeping out even the smallest amount of moisture. There is a drainage system that removes the excessive water. There are no floor slabs to create any sort of interruptions thus taking away the possibility of thermal bridging and temperature fluctuations.

  1. Q-Insulated Façade Systems:

 There are essentially two metal reinforced layers that are very flexible and are combined using an insulation core. It is highly resistant to fire. The preferred metal used is aluminum, especially due to its versatility that allows it to be used for various different functions.

  1. Q-Linex Façade Systems:

The simplest form, where all the remaining ones were made of more than one component fixed together with some sort of hinge of insulation. This system is a single panel that is attached to a secondary support system which is essentially a part of the house or building. The panel dimensions depend on the necessity.

The thickness of the material used depends on the width of the system needed. The material used can vary from aluminum, zinc, stainless steel and even alloys.

Choosing the Right Design

Today, facades are important like never before. The progress made in this field is the combined effort of a bunch of people who felt intrigued by the design of facades and strived to constantly push the limits of perfection and efficiency

The aim has always been to create the most practical but beautiful façade, you are always welcome to choose your façade from Telling Architectural Facades, acclaimed for their dedication to perfection.

What could threaten NPP owners with underestimating the importance of cybersecurity?

In Financial Times recently the information appeared about the employees of nuclear power plants negligently treat the protection of their virtual data. According to researchers, because of this there were more than fifty dangerous incidents. This information had been got during the work investigations of nuclear power plants from the USA, Ukraine, Germany, France, Canada, Great Britain and Japan.

The poll of officials who are responsible for the safety of nuclear power plant was shown that the physical protection in most cases is at a good level, but among employees practically nobody cares for their virtual protection.

Is it worth defending the nuclear power plant from hacker attacks?

Most of the employees of the nuclear power plants consider that the main thing is a physical safety, and they shouldn’t worry about the rest. Employees of the NPP explain such carelessness with the fact that stations have no Internet access as superfluous. Where is no Internet – there are no hacker attacks. But it is not absolutely so. Anyway, nuclear scientists have access to “World Wide Web”, at least the departments of finance, allocations, etc. The Internet is necessary for them as it helps to save time and resources for the exchange of information, its search and handling. Basic data on the entities are also stored in digital form. The leakage of this data is capable of bringing much harm to stations. There is information that in Ohio there was an overload of safety network on nuclear power plant because one of the workers went on-line, without VPN connection. If you are looking for which type of VPN service to choose, then you can select the appropriate VPN service on the Anta Net website. The information provided there will help to coordinate and choose the service that suits you best.

What is the reason for the weak protection of NPP?

Nuclear scientists hardly ever use the protected VPN, and the management most often has bad awareness on cyber security. For many years people had worked on making the atomic energy safe for the environment and they did it. But in the modern world, the threat of hacker attacks is no less terrible than non-compliance with engineering safety rules.

The majority of systems for management and safety of information were created in the 60th years of past century and from that time changed only a little. It should come as no surprise that in comparison with modern technologies the virtual safety of NPP is extremely unreliable.

What could threaten the nuclear power plant from the side of the network?

The first that threatens the unprotected Internet connection – is malefactors. They can easily find a gap in protection of network; get access to important information and to do much harm to stations. Considering specifics of the object, harm can be not only financial, but also physical. The hacker is capable of interfering with the technologically automated processes and that can lead to an emergency situation. In other words, the hacker attack threatens with radiation poisoning.

The second danger of virtual network insufficient protection is the possibility of virus infection. Even harmless “worm” is capable of stopping the normal work of computer and systems of automation for a long time, not to mention more difficult dangerous virus programs. All nuclear power plants must have good anti-virus protection.

What can nuclear scientists make for cyber security? The complex of the changes directed to the protection of virtual space of the station is necessary. Using of VPN to connection with the Internet will allow being protected from data leakage. Constantly updated anti-virus system will be able to protect the system from harmful programs.

The Types Of Paints You See In 9 building projects out of 10

The modern building project employ dozens of technologies, and nowadays paints play not only an aesthetic, but also protective role. Water-resistant paints represent one of the most widespread paint types for external use. These paints are well suited for the bathrooms, basements and ceilings to deal with high level of humidity. Unlike other types of materials, it lasts long, plus it can be refreshed without much effort and huge expenses.

Since the surface of the wall is porous, covering it with usual paints is quite a risky affair, because the pores accumulate water vapor, which will eventually evaporate, thereby, resulting to peeling and cracking of the material. Water-resistant paints (acrylic) have the ability to penetrate deep into the pores, preventing the surface from peel off from the substrate and don’t crack over time. When applying the paint keeping surface dry is essential to provide decent adhesion and essure sufficient water repellency. Thus, the water-resistant paints are not afraid of water due to a reliable coating, resistant to wet cleaning and allowing repainting without removing the previous layer. By purchasing this finishing material, you need to pay attention to its bacteriological features. With the presence of protective components, the paint can be well suited for painting of floors, walls and ceilings in rooms with high humidity. Some companies, like Britannia, concentrating their efforts on exterior wall coatings, offer fully eco-friendly products that pose no threat to human health. Continue reading “The Types Of Paints You See In 9 building projects out of 10”